LEARN / OCEAN WAVES / CHAPTER 27

Seiches and Harbour Resonance

Full original scientific lesson and experiments, reorganized into a dedicated chapter.

Original physics and annotationsInteractive scientific demonstrationsScientific teaching examples

Scientific scope: This lesson retains the original scientific explanations, diagrams, equations and interactive demonstrations. All numerical examples are educational and subject to their stated assumptions; they are not independently field-validated engineering design tools or operational forecasts.

CHAPTER 27 / SEICHES AND HARBOUR RESONANCE

A basin has its own rhythm.

Water disturbed in a basin can continue to oscillate after the disturbance has passed. These standing oscillations are called seiches. Their natural periods depend on the basin's dimensions, depth and boundaries. Repeated forcing near a natural frequency can build a much larger response, but the forcing pattern and the ways energy escapes or dissipates also matter.

A standing pattern, not a travelling crest.

In a single standing mode, some locations rise while others fall. A surface-elevation node stays at the mean level throughout the cycle; an antinode has the largest vertical excursion. A flat surface at one instant does not mean the oscillation has stopped. Different parts of the basin exchange potential and kinetic energy as the cycle continues.

The fundamental mode is the slowest nonzero oscillation. Higher modes fit more spatial structure into the same basin and have shorter periods. A real disturbance can excite several modes at once; the resulting motion need not resemble one simple back-and-forth pattern.

The opening changes the ideal pattern.

A rigid end is an elevation antinode in this uniform-depth, one-dimensional model. A perfectly open end is idealized as an elevation node. A basin closed at both ends fits half a wavelength in its fundamental mode; a basin closed at one end and open at the other fits a quarter wavelength. With identical length and depth, the latter therefore has twice the fundamental period.

A real harbour mouth is not generally a perfect node. Entrance geometry, exchange with the exterior and wave radiation alter the oscillation periods and damping. The quarter-wave estimate is a useful starting point, not a complete harbour model.

Explore a mode, then explore its response.

Panel A shows an undamped free mode with a fixed 0.10 m antinode amplitude. Panel B uses the same natural period in a separate, normalized forced-oscillator experiment. Changing damping or forcing frequency changes Panel B only; it does not scale or damp Panel A.

A · Free standing mode
Blue: instantaneous elevation. Dashed: ± amplitude envelope. Coral dots: permanent elevation nodes. Depth and elevation use different scales; this is a schematic longitudinal section.

B · Idealized single-mode response
Navy: steady response divided by static modal displacement. Coral: chosen frequency ratio. Dashed vertical line: undamped natural frequency, r = 1. This is not harbour/outside wave-height amplification.

Run uses an accelerated eight-second display cycle, not real-time basin evolution. Adjusting the free-mode cycle pauses playback. No currents, vessel motions or loads are calculated.

Three experiments to try.

  1. Keep the fundamental mode and change the right end from closed to open. Its natural period doubles, and the right-hand antinode becomes a node. The basin length has not changed; the wavelength that fits has changed.
  2. Double the length: the period doubles. Increase depth from 2.5 m to 10 m: the period halves because long-wave speed varies as √h. Higher modes are faster, not larger by definition.
  3. At r = 1, increase damping. The normalized response falls and the resonance curve broadens. Move to r > 1: the displacement lags the forcing by more than a quarter cycle. The blue free-mode illustration remains unchanged because it is a separate experiment.

A kilometre-long basin, ten metres deep.

With g = 9.81 m/s², long-wave speed c = √(gh) = 9.9045 m/s. A closed basin's fundamental period is 2 × 1000/9.9045 = 201.93 s, or 3.37 minutes. Its fundamental wavelength is 2000 m. The ideal open-ended counterpart has wavelength 4000 m and period 403.86 s, or 6.73 minutes.

In the separate oscillator example, ζ = 0.10 and r = 1 give response factor 1/(2ζ) = 5 and phase lag 90°. The displacement-response maximum occurs slightly below r = 1: rpeak = √(1 − 2ζ²) = 0.98995, with peak factor 5.0252. Neither number specifies a real harbour wave height because the modal forcing strength and coupling have not been supplied.

Why a small surface motion can matter.

Long-period oscillations can disrupt harbour operations even when the visible rise and fall seems modest. A moored vessel and its mooring system have their own dynamic response, which must be assessed separately. An elevation node is not a place where all water motion vanishes, so placing a gauge or berth at a node does not establish safe conditions. This lesson does not estimate vessel movement or mooring loads.

Infragravity waves can supply forcing in a relevant period range, linking this chapter to Chapter 26. Wind and atmospheric-pressure disturbances can also excite basin oscillations. Matching a forcing period to a natural period indicates potential resonance; substantial response additionally requires the spatial forcing to couple to the mode. A free seiche left after a disturbance and a continuously forced resonant response are distinct situations.

Deriving the mode periods and identifying nodes

For small surface displacement in a narrow basin with uniform depth, the linear long-wave equation is ηtt = gh ηxx. Let c = √(gh), and write η(x,t) = A cos(kn x) cos(ωn t), with x = 0 at the closed left end, ωn = ckn and A = 0.10 m. A rigid end imposes zero normal motion, equivalent here to ηx = 0. The ideal open right boundary imposes η = 0.

Closed–closed natural periods
kn=nπℓ,Tn=2ℓngh
Closed–open natural periods
kn=(2n−1)π2ℓ,Tn=4ℓ(2n−1)gh
Mode index and kinematics
n=1,2,3,…,λn=2πkn,Tn=2πωn
Elevation nodes (within basin)
xj=(2j+1)π2kn,0≤xj≤ℓ
Elevation antinodes (within basin)
xj=jπkn,0≤xj≤ℓ

The closed-basin uniform mode n = 0 is excluded: it represents a mean-level change, not a free oscillation with a finite period. Each displayed closed mode has zero spatially integrated surface displacement. The open-ended mode can exchange water with the exterior and need not satisfy that closed-basin volume constraint.

The shallow-water approximation requires knh ≪ 1. The readout reports knh and compares the period with the finite-depth linear relation ω² = gkn tanh(knh), retaining the same ideal boundary wavenumber. This checks the long-wave approximation only; it does not correct a real harbour entrance. The displayed parameter limits keep knh below 0.283.

For a rectangular closed basin with appreciable width W, additional transverse modes have Tnm = 2/{√(gh)√[(n/ℓ)² + (m/W)²]}, where n and m are nonnegative integers and not both zero. These two-dimensional modes are not plotted here. Irregular bathymetry, connected basins and entrances usually require more detailed analysis.

What the resonance curve actually calculates

The curve is the exact steady harmonic solution of a linear single-degree-of-freedom modal oscillator with constant positive damping. Let q be a modal displacement coordinate and F0 the forcing amplitude per unit modal mass. F0 is not an offshore water elevation. The static displacement for constant forcing is qstatic = F0/ωn².

Forced modal oscillator
q¨+2ζωnq˙+ωn2q=F0cos⁡(ωt)
Frequency ratio
r=ωωn=TnTforcing
Normalized response amplitude
M=|q|qstatic=1(1−r2)2+(2ζr)2
Phase lag and response
δ=atan2(2ζr,1−r2),qqstatic=Mcos⁡(ωt−δ)
Displacement response peak
rpeak=1−2ζ2,ζ<12
Peak response magnitude
Mpeak=12ζ1−ζ2

At r = 1 the phase lag is 90°, but the displacement-response peak lies slightly below this frequency when damping is nonzero. Frequency ratio and period ratio are reciprocals, not interchangeable axes. The plot holds its vertical scale fixed at 0–11 to make damping comparisons honest; all allowed peak values fit.

This is a steady forced response after transients have decayed. It does not show startup or ring-down. Damping ζ is dimensionless and prescribed; it is not a calibrated bottom-friction coefficient or an energy-loss percentage. In a harbour, radiation through the entrance and several dissipative mechanisms contribute to an effective damping that may depend on frequency. This curve cannot predict them.