New in this chapter: Explore incident and reflected waves together using linked 1D, 2D and 3D views. The older two-view reflection/transmission/loss experiment is preserved in the supplementary section below.
One incoming wave.
Three destinations for its power.
When waves meet a coastal structure, some energy may return seaward, some may reach the sheltered side, and some may be converted into turbulence and heat. A quieter lee does not tell us which process dominates. The reflected field and the energy budget must also be examined.
Height coefficients are not percentages of power.
Define the amplitude coefficients Kr = Hr/Hi and Kt = Ht/Hi using the heights of the separate incident, reflected and transmitted waves. For regular linear waves, mean energy per unit horizontal area is E = ρgH²/8. Power per metre of crest is P = E Cg, where Cg is group velocity.
At equal depth, equal frequency and normal incidence, reflected and transmitted power fractions are Kr² and Kt². A reflected height half the incident height therefore carries one quarter of its power. The dissipated fraction D is defined by the power balance, not by subtracting heights: D = 1 − Kr² − Kt².
Ask what the structure actually does.
An ideal impermeable vertical wall reflects strongly and transmits no waves through its material. A permeable structure can transmit part of the field while dissipating energy internally. Waves can also reach the lee by overtopping or by travelling around an end. These pathways involve different physics and cannot be inferred from a single coefficient alone.
The experiment prescribes a passive energy partition. It does not predict coefficients from a structure's material, geometry or crest elevation. CEM provides separate methods for particular structure types; those methods require additional inputs and applicability checks.
Reflection: see the standing-wave field develop
Move the virtual gauge and vary the amplitude reflection coefficient, period and angle. The 1D gauge record, 2D interference map and 3D perspective wave surface use one linear incident–reflected superposition calculation.
The interactive reflection experiment loads when this section is in view. Alternatively explore it in Wave Lab.
Important distinction: This main studio treats reflection and interference at a long, straight boundary in uniform depth. It does not independently calculate transmitted wave conditions, structural dissipation or impact pressures. Expand the supplementary reflection–transmission–loss budget experiment below for those separate bookkeeping concepts.
The Wave Lab reflection studio remains available for independent exploration.
Supplementary experiment — reflection, transmission and dissipation budget
This original two-view teaching tool introduces a prescribed passive power allocation among reflected, transmitted and dissipated components. It complements, but does not replace, the linked reflection-wave field above.
Follow the same wave through two views.
Regular waves travel east, toward 90°, in 10 m depth on both sides. Incident height is 0.40 m and period is 6 s. The grey band is an unresolved interaction region, not a model of a wall or porous medium.
Navy: total seaward surface. Blue: incident; coral: reflected. Green: transmitted. Dashed: seaward amplitude envelope.
Paused
The three shares sum to 100%. They remain constant while the surface moves.
The loss slider applies only to the power that was not reflected. Transmission is calculated from the remainder, so the example cannot create energy. Phase shifts move interference nodes without changing the power fractions.
Three controlled experiments.
- Set Kr = 1 and reflection phase = 0°. All incident power returns seaward; the seaward surface is a standing wave. The loss slider has no effect because no power remains to allocate.
- Set Kr = 0 and loss = 0%. The incident wave is entirely transmitted in this idealization.
- Set Kr = 0.5 and loss = 40%. Reflection takes 25%; dissipation takes 40% of the remaining 75%, or 30%; transmission takes 45%. Kt = √0.45 ≈ 0.671, not 0.45.
A standing pattern does not generate power.
For perfect reflection with zero phase shift, the surface is η = 2a cos(kx) cos(ωt). Antinodes have twice the incident amplitude while nodes have no surface oscillation. The net seaward-side power toward the structure is zero. Local surface variance alone does not describe total local energy: particle motion contributes kinetic energy, and local kinetic and potential energies need not be equal in an interference pattern.
With partial reflection, the total seaward surface is the coherent sum of two travelling components. Do not treat its local crest-to-trough height as the incident height when calculating Kr. Incident/reflected separation generally needs suitable spatial measurements and a wave model; one elevation record cannot uniquely separate two arbitrary opposing waves.
Equations and exactly what the controls prescribe
Let a = Hi/2 = 0.20 m, ω = 2π/6 s⁻¹, and solve ω² = gk tanh(kd) at d = 10 m. Group velocity is Cg = ½[1 + 2kd/sinh(2kd)]ω/k. Use ρ = 1025 kg/m³ and g = 9.81 m/s².
λ is the slider's fraction of unreflected power dissipated; it is not D itself. R, T and D above denote power fractions; the period is written explicitly as 6 s in this experiment to avoid confusing it with the fraction T. δ is the prescribed reflection phase. The transmitted phase is set to zero as a teaching convention. No surface or velocity matching condition is imposed across the unresolved interaction region, and these chosen coefficients and phases are not a solution for a specified structure.
The plotted coordinate is x/L. Incident and reflected fields occupy x < 0; the transmitted field occupies x > 0. A small band around zero hides the unresolved interaction. The envelope is a positive amplitude magnitude; both ±A are drawn. For Kr = 1, δ = 0, the first seaward node is at x = −L/4.
Different depths, angles and random seas
If transmitted and incident group velocities differ, a height ratio alone no longer gives a power ratio. At normal incidence, Pt/Pi = Kt² Cg,t/Cg,i. For power crossing a fixed interface under oblique incidence, also include the ratio of the normal-direction factors cosαt/cosαi, with α measured from that interface's normal. The reflected branch on the incident side has the same group speed and equal angle magnitude in the usual stationary, uniform-medium case.
For a directional spectrum, reflected and transmitted coefficients may depend on frequency and angle. Integrate the component power contributions with their group velocities and normal-direction factors. An integrated significant-height ratio summarizes variance; it need not equal the square root of the integrated power ratio when spectra, depths or directions differ.
A measured missing-power residual is not automatically all dissipation. An incomplete control volume, unresolved directions, temporary energy storage and measurement errors can also affect the balance. The three-way budget here assumes steady conditions and that reflection, transmission and dissipation account for every pathway.