Behind a breakwater,
the sea still moves.
A breakwater interrupts an approaching wave crest, but its geometrical shadow is not a region of perfectly still water. Waves spread around the tip, changing both their height and the shape of their crests. This redistribution is called diffraction.
Wave diffraction: follow the wave field into the shadow.
Explore one phase-consistent regular-wave field through a virtual gauge, a labelled 2D shelter map and a rotatable 3D surface. Choose the stationary diffraction coefficient Kd to inspect illuminated-side interference separately from the moving surface elevation. The top-down camera aligns the 3D view with the map.
The diffraction laboratory loads when this chapter is visible. If it remains blank, open the dedicated Wave Lab version.
Important model distinction: The new simulator uses a one-way, paraxial Fresnel absorbing-edge approximation. It does not calculate wall reflection or the complete Sommerfeld/Penney–Price field of an impermeable breakwater. The earlier Chapter 23 reflective-barrier experiment and its derivation are preserved below as a supplementary, separate idealization. Do not combine their Kd values or use either lab directly for engineering design.
For a dedicated large view, use Wave Lab → 1D–2D–3D diffraction.
Three processes, three questions.
Refraction changes propagation direction when wave speed varies, for example over changing depth. Reflection sends part of the wave field back from a boundary. Diffraction redistributes the field laterally around obstacles and across variations along a crest. These processes can occur together; a sheltered point may receive waves even when a straight incident ray cannot reach it.
The new linked laboratory isolates the absorbing-edge Fresnel approximation; it does not model wall reflection. The supplementary original experiment below instead addresses a different rigid, reflecting-barrier idealization. Both assume constant depth, so neither includes shoaling or depth-induced refraction. Their diffraction coefficients must not be treated as interchangeable.
A coefficient describes local height.
The diffraction coefficient is Kd = Hd/Hi, the local regular-wave height divided by the incident regular-wave height. For this periodic field, Kd² is the ratio of local surface-elevation variance to incident variance, and also the ratio of mean gravitational potential energy. In a coherent interference field, total local energy additionally depends on particle velocities. Kd² is not, by itself, the fraction of power transmitted through an entire harbour entrance.
Kd can exceed one locally because interference concentrates the field. This is redistribution, not energy generation. In the shadow, the height generally diminishes away from the edge; beyond the shadow, constructive and destructive interference produce oscillations.
Supplementary original Chapter 23 experiment — idealized reflecting-breakwater field
This earlier interactive experiment and its equations represent a different boundary-condition assumption from the new Fresnel lab. Use its map, wave-height ratios and mathematical derivation as a complementary study, not as a numerical validation of the absorbing-edge approximation.
Look into the wave shadow.
A thin, fully reflecting barrier extends south from the origin. Incident waves travel east, toward 90°, normal to the barrier. The map covers a fixed 300 m × 300 m lee-side region. Changing period or depth changes wavelength without moving the barrier or gauge.
North is up; east is right. The dashed line is the geometrical shadow boundary. The dot is the movable gauge.
Paused
Blue: Kd. Dashed: straight-ray prediction, with an abrupt shadow. Coral dot: gauge.
Height ratio is time-independent. Run switches to the moving surface. Colours are quantities in the legend, not bathymetry. aᵢ = Hᵢ/2.
Predict, then experiment.
- Keep the gauge south of the shadow boundary. Increase the period and compare Kd at the same physical location; the ratios x/L and y/L change.
- Move the gauge through y = 0. The wave field makes a smooth transition, unlike the abrupt straight-ray shadow.
- Run the surface view. Curved crests extend into the shadow. Switch back to height ratio to separate an oscillating surface from its stationary amplitude pattern.
A small calculation with a useful warning.
If Kd = 0.30 and the incident regular-wave height is 1.0 m, the local regular-wave height is 0.30 m and the surface-elevation variance ratio is 0.30² = 0.09. This does not mean that 91% of all incoming energy has been dissipated: most of the wave field lies elsewhere. For a rigid barrier, no energy passes through the material itself.
Mathematics: the constant-depth half-plane solution
Let x point east, y north, and the barrier occupy x = 0, y ≤ 0. We show x ≥ 0. Solve ω² = gk tanh(kd), with ω = 2π/T and L = 2π/k. A complex spatial coefficient Z describes the surface: η(x,y,t) = aᵢ Re[Z exp(−iωt)], and Kd = |Z|.
This is the normal-incidence Sommerfeld–Penny–Price half-plane solution in the coordinates above. Both terms are retained; dropping the second would omit the diffracted contribution from the reflected wave. It solves the linear constant-depth Helmholtz problem with zero normal velocity at the rigid barrier. Fresnel integrals are evaluated from a numerical table; the map samples the resulting analytical field rather than advancing a coastal model on a mesh.
The mathematical tip has singular spatial gradients. The image samples cell centres and does not resolve local tip loads. A value near Kd = 0.5 along the distant shadow boundary is a useful limit, not an exact coefficient everywhere on that line.
From one wave to a spectrum and a harbour entrance
Different periods and incident directions have different diffraction patterns. For independent random components, transform each component's variance by its own |Z(f,θ)|² and then integrate. Adding wave heights instead of variances is incorrect for that statistical calculation; coherent components require their complex phases. A shorter component and a longer component therefore need not be sheltered by the same amount.
A finite entrance has two edges, with interacting diffracted fields. Multiple reflections, entrance geometry, varying depth and harbour resonance can all matter. Two copies of this height-ratio map cannot simply be added to produce a gap solution. CEM discusses separate gap and directional-wave analyses; those are extensions beyond this experiment.
Explore the linked 1D–2D–3D reflection studio in Wave Lab.