LEARN / OCEAN WAVES / CHAPTER 17

Directional Seas near Shore

Full original scientific lesson and experiments, reorganized into a dedicated chapter.

Original physics and annotationsInteractive scientific demonstrationsScientific teaching examples

Scientific scope: This lesson retains the original scientific explanations, diagrams, equations and interactive demonstrations. All numerical examples are educational and subject to their stated assumptions; they are not independently field-validated engineering design tools or operational forecasts.

CHAPTER 17 / DIRECTIONAL SEAS NEAR SHORE

Each component takes
its own path.

An offshore spectrum contains waves with different periods and directions. As the water becomes shallower, each component changes speed and turns according to its own wavelength and approach angle. The nearshore spectrum is therefore more than an offshore spectrum multiplied by one height factor.

Turning toward the depth-contour normal.

Over straight, parallel depth contours, a component obeys sinα/C = constant. Here α is its signed angle from the shoreward normal, and C is phase speed. A decrease in C reduces |α|: oblique waves turn toward the normal. Group velocity Cg controls energy transport, while phase speed C controls this refraction relation.

The example places north toward shore, east to the right and depth contours east–west. All bearings describe propagation toward: 0° is north and angles increase clockwise. Thus 320° is α = −40°, and 70° is α = +70°. Refraction can move both systems toward north without making them identical.

Conserve the flux crossing a contour.

For a stationary, laterally uniform, nonbreaking component, its shoreward variance flux is v Cg cosα, where v is the component variance. With no sources or losses, that flux stays constant. Variance itself can rise or fall as group speed and direction change. Multiplying by ρg gives the corresponding energy flux per unit crest-parallel length.

Conservation applies component by component. Refraction can also compress a directional band. A higher directional density need not indicate local wave generation: the same contribution can occupy a narrower interval of direction.

Two systems over parallel contours.

Two frequency lines, 0.10 and 0.16 Hz, carry offshore variances 0.30 and 0.18 m². Each is represented by five weighted rays, separated by 5°. This deliberately coarse directional quadrature isolates the mechanism; it is not a continuous forecast spectrum.

Plan view: distances in metres, east right and north toward shore. The bed slopes uniformly from 50 m offshore to the selected depth over 1 km. Central rays begin at different eastings for clarity; lateral uniformity makes their starting positions arbitrary.

Bar heights are integrated line variances in m², not density per hertz. Blue: offshore. Coral: selected depth. Ray directions and line contributions come from the same component calculation.

Offshore central bearings: 320° and 70°. Each band has offsets −10°, −5°, 0°, 5°, 10° and normalized weights 1:4:6:4:1.

Component calculation and directional density

ω² = gk tanh(kd),   C = ω/k,   Cg = ½[1 + 2kd/sinh(2kd)]C

α(d) = asin{[C(d)/C₀] sinα₀}

v(d) = v₀ Cg₀ cosα₀ / [Cg(d) cosα(d)]

Hm0(d) = 4√Σv(d)

For a continuous distribution, a mapped interval must carry the transformed variance: S(f,θ)dθ follows the interval, including the angular Jacobian and flux factor. It is incorrect to move density values into new directions and leave their angular widths unchanged. Angular integrals use radians. This experiment retains weighted integrated contributions rather than reconstructing a finely resolved directional density.

The displayed paths integrate dx/dy = tanα along a linear depth profile using 100 trapezoidal steps. Local directions and flux factors use the dispersion solution directly. Frequency stays constant because the bed is stationary and there is no ambient flow. Reflection, diffraction, breaking and dissipation are excluded; the shallowest settings expose the limit of this idealization rather than predicting surf-zone heights.