Waves pass.
The average level changes.
A crest is a temporary rise. Setup is a rise in the time-averaged water level. Follow the same beach from unbroken waves into an idealised surf zone, and discover why these are different.
A · A shallow beach section
B · Magnify the mean-level change
C · Two budgets, different stories
Ratios are dimensionless; these are different physical quantities. Energy flux stays constant before breaking. Momentum flux grows before breaking, then decreases with depth-limited height in the surf zone.
New experiment: normal incidence; fixed period 20 s; offshore depth 4 m; mean level fixed to zero there. This is a shallow-water approximation, not a continuation of the 50 m full-dispersion labs.
The domain ends at h = 0.20 m. It does not reach the shoreline or predict run-up.
Breaking-depth datum (reset defaults): The bed depth below the original still-water level is hb ≈ 0.956 m; mean set-down at the break is η̄b ≈ −0.031 m. Thus the total mean water depth is Db = hb + η̄b ≈ 0.925 m. The readout above reports hb, not Db. These are vertical depths in metres, not horizontal distances. Changing the sliders changes the calculated breaking state; this numerical example applies to the reset defaults only.
Why can the mean surface slope?
Waves carry momentum as well as energy. Radiation stress is the excess, wave-averaged momentum flux; the name does not refer to electromagnetic radiation.
In this simplified cross-shore balance, a change in wave momentum flux is balanced by a pressure force associated with a sloping mean surface. Before breaking, increasing momentum flux accompanies set-down. Across the model surf zone, decreasing momentum flux accompanies a shoreward rise in mean level.
“Breaking pushes water up” is an incomplete explanation: the important quantity in this balance is the spatial gradient of momentum flux.
Predict, then experiment.
- Turn on mean level only. Does the raised mean disappear when individual crests are hidden?
- Increase the input height. Compare the breaking position, the set-down minimum and the nearshore mean level.
- Change slope while inspecting the same h. The level is unchanged here, but the distance over which it changes is different.
This is setup, not swash. We are calculating a steady average, not individual uprush events, shoreline motion, tide or storm surge.
Connect the picture to the balance
x increases shoreward; h is bed depth below the still-water datum; η̄ is mean surface displacement; D = h + η̄ is total mean water depth. Sₓₓ has units N/m and its gradient N/m².
These are normal-incidence, shallow-water approximations. Before breaking, F is constant. After breaking, we prescribe H = γD; F then decreases. The post-breaking height rule is a closure assumption, not an output of a resolved breaker simulation.
Go deeper: the piecewise solution
Let Dᵣ = 4 m and η̄ᵣ = 0. Before breaking:
H = Hᵣ(Dᵣ/D)1/4
η̄ = −(Hᵣ²√Dᵣ/16)(D−3/2 − Dᵣ−3/2).
Find Dᵦ from H(Dᵦ) = γDᵦ. In the surf zone define A = 3γ²/8, then η̄ = η̄ᵦ + A(Dᵦ − D). Combining D = h + η̄ gives dη̄/dx = [A/(1 + A)]/N on a plane slope 1:N. H, η̄ and Sₓₓ are continuous at the transition; their gradients need not be.
This analytic solution retains D in the hydrostatic balance. It does not resolve rollers, undertow momentum, bed shear, reflection, nonlinear wave shape or irregular breaking.
Boundary condition, validity and evidence
The offshore mean level is prescribed, so every displacement is relative to that finite-depth boundary. It is not an absolute water-level forecast. Fixing T = 20 s keeps h/L small throughout the domain; shallow-water kinematics still do not make linear wave shape accurate near breaking.
Verification checks cover continuity at breaking, the momentum-balance residual, pre-breaking flux conservation, decreasing surf-zone flux, the analytic surf-zone slope and the zero-wave limit. These are mathematical checks, not validation against measurements.
Scientific basis: Reeve, Chadwick & Fleming (2018), §2.6.3, printed pp. 65–67. The governing balance can also be read freely in SWAN’s technical documentation: wave-induced setup ↗. SWAN is a more general spectral model; this lab does not reproduce its full implementation. Text, diagrams and implementation here are original.
Check your understanding
Is setup the height of a passing crest? No: it is a mean-level change measured relative to a stated reference.
Does constant energy flux imply constant momentum flux? No. Panel C shows why set-down can occur even before energy is dissipated.
Can this model tell us how far a wave runs up the beach? No. That requires shoreline and swash dynamics, outside this chapter.