LEARN / OCEAN WAVES / CHAPTER 03

Wave Shoaling

Complete scientific lesson migrated from the original Earth in Motion collection.

Original equations and figuresInteractive where providedScientific teaching examples

Scientific scope: This lesson retains the original scientific explanations, diagrams, equations and interactive demonstrations. All numerical examples are educational and subject to their stated assumptions; they are not independently field-validated engineering design tools or operational forecasts.

CHAPTER 03 / SHOALING

Shallower water.
Always taller waves?

Not immediately. A wave can become slightly smaller before it grows towards shore. To understand why, follow the speed at which its energy travels.

MAIN INTERACTIVE EXPERIMENT · THREE LINKED VIEWS

Shoaling: one wave, three scientific perspectives

Adjust a regular incident wave and follow the same calculation through a 1D virtual gauge, a 2D cross-shore section and a rotatable 3D surface view. Period, local wavelength and height are linked by linear dispersion and idealised energy-flux conservation.

The interactive shoaling experiment loads when this section is in view. Alternatively explore it in Wave Lab.

Model boundary: Regular, normally incident linear waves, gradual depth changes and constant energy flux until an illustrative breaking screen. This linked 1D–2D–3D studio uses H/h = 0.78 only; the supplementary profile below also checks a Miche-type steepness limit, so the two screens can stop at different depths. The 3D visualization is an animated perspective of the solution, not a three-dimensional hydrodynamic solver or a breaking-wave calculation.

The full Wave Lab version remains available for standalone exploration.

Supplementary experiment — original shoaling profile and energy-flux diagram

This earlier analytical experiment retains the detailed depth-profile plot, height envelope and point-by-point energy interpretation. Use it to check the linked views above.

OBSERVE / INSPECT / EXPLAIN

The journey over a sloping seabed

Linear sinusoidal waves are illustrated; real waves become asymmetric near breaking. Click to inspect a depth. Coral: selected point · Dashed boundary: estimated breaking · Beyond the boundary: no wave prediction.

Blue: calculated height before breaking · Grey dashed: input height · Coral: selected depth. The horizontal depth axis is logarithmic; it does not represent distance.

LOCAL HEIGHT
HEIGHT / REFERENCE
GROUP SPEED

Follow the energy.

Shoaling is the change in wave height caused by changing water depth. In this idealised experiment, no energy is added or lost before breaking. The same energy flux must pass each section.

Wave energy travels at group speed, which differs from the speed of an individual crest. When group speed increases, wave height decreases. When it decreases towards shallow water, wave height increases.

Try this.

  1. Keep the default period of 8 s and input height of 1 m.
  2. Move the selected depth from 50 m towards 10 m. Look for the small dip in height.
  3. Continue towards 2 m. Compare the growing height with the decreasing group speed.
  4. Increase the input height. Notice where the calculation reaches its breaking boundary.

In this stationary-depth, no-current model, the wave period stays constant along the propagation path. Changing the period slider starts a different experiment.

Connect the picture to the equation
01 / WAVE ENERGYE=ρgH28

Energy per unit surface area grows with height squared.

02 / CONSERVE ENERGY FLUXECg=constant

In this model, energy is transported without loss before breaking.

03 / FIND THE NEW HEIGHTKs=Cg,refCg

Compare local group speed with the reference speed.

H=HrefKs

H is crest-to-trough height (m); Cg is group speed (m/s); Ks is dimensionless. The reference is at 50 m depth, which is not necessarily deep water for every period. Here Kₛ denotes a height ratio relative to that reference, rather than necessarily the conventional deep-water shoaling coefficient.

Where does the calculation stop?

The curve ends at the first point where the predicted regular-wave height reaches the smaller of 0.78h and 0.142L tanh(kh). These approximate depth and steepness limits flag the end of the unbroken-wave illustration. Actual breaking depends on wave and seabed conditions.

Beyond that point, local height and the shoaling factor are hidden. We do not extend conservation of unbroken-wave energy flux into the surf zone.

Compare the two teaching screens: This supplementary plot stops when the lossless prediction reaches H = min(0.78h, 0.142L tanh(kh)), combining a depth-index screen and a Miche-type steepness screen. The linked studio instead uses H/h = 0.78 alone. For the illustrative inputs T = 4 s, Href = 2 m at href = 50 m, the first crossings are at approximately h = 2.63 m (combined) and h = 2.40 m (depth-only). These are water depths, not horizontal shoreline distances or observed breaker locations. Neither model resolves surf-zone dissipation or turbulence.

Assumptions and group speed

Small-amplitude regular waves approach a slowly varying bed normally. No currents, refraction, reflection, wind input or dissipation before breaking. This is a local-depth transformation, not a resolved beach or breaking model.

Cg=L2T[1+2khsinh(2kh)]

Wavelength L comes from the same linear dispersion relation as Chapter 02. Near breaking, linear theory becomes less reliable; the boundary is an educational screening rule.

Theory references: Holthuijsen (2007), §7.3.1, pp. 199–201; Reeve, Chadwick & Fleming (2018), §2.3.2, pp. 33–34. The breaking approximation is discussed separately from the linear shoaling solution.

← Back to the learning journey