How deep is “deep water”?
Change the water depth or wave period. Compare the calculated wavelength and the changing shapes of water-particle orbits. The profile rescales to display two wavelengths.
Try this.
Choose Intermediate water. Keep the depth fixed, then increase the period. Longer waves feel the bottom more strongly—even though the seabed has not moved.
Three regimes, gradual transitions.
Deep: h/L ≥ 0.5. Particle motion decays rapidly below the surface. Depth has little influence on phase speed.
Intermediate: 0.05 < h/L < 0.5. The seabed increasingly influences motion and speed. Particle paths become flatter with depth.
Shallow: h/L ≤ 0.05. Motion extends through the water column. Phase speed approaches √(gh).
Why does the pattern change?
Water cannot flow through a solid seabed. Vertical motion diminishes near the bottom, flattening particle paths. When depth is small relative to wavelength, that constraint affects the entire water column.
Show me the mathematics
ω = 2π/T is angular frequency; k = 2π/L is wavenumber; g = 9.81 m/s². We solve this equation for k, then calculate L and phase speed c = L/T.
Deep-water limit: c ≈ gT/(2π). Shallow-water limit: c ≈ √(gh). The full equation gives a continuous transition.
Assumptions & visual interpretation
Small-amplitude, regular, nonbreaking waves in uniform depth with no current. Each slider setting is a separate local wave state, not a model of a wave crossing the entire beach. No dimensional wave height is assigned to the normalised orbit display; shoaling is not calculated here.
Orbit shapes and phase use linear theory. Within each setting, all orbits share one enlargement factor, preserving relative sizes and ellipse aspect ratios. Orbit size is normalised again when settings change, so absolute excursions cannot be compared across settings. The surface graph has a different scale. Motion follows the selected period. Closed orbits omit higher-order drift.
Explore the open references
NOAA NDBC: How are ocean waves described? ↗
Start with wave terminology.
Theory reference: Holthuijsen (2007), Chapter 5, §§5.4–5.5, for particle motion, dispersion and energy transport.
One theory, three useful forms.
The full linear dispersion relation, ω² = gk tanh(kd), connects depth, frequency and wavelength. The shallow and deep expressions are its limiting approximations. The middle column remains valid across depths within linear theory; it is not restricted mathematically to the transitional range.
Use a = H/2, k = 2π/L, ω = 2π/T and ψ = kx − ωt. Depth d is positive and corresponds to h in the experiment above; z is positive upward from still water, so the bed is z = −d. Waves travel in +x. The symbol ψ denotes wave phase, leaving θ available for a compass bearing in later chapters.
| Quantity | Shallow limit | General finite depth including transitional water | Deep limit |
|---|---|---|---|
| Relative depth | |||
| Elevation η (m) | |||
| Phase speed C (m/s) | |||
| Wavelength L (m) | |||
| Group speed Cg (m/s) | |||
| Horizontal velocity u (m/s) | |||
| Vertical velocity w (m/s) | |||
| Horizontal acceleration ax (m/s²) | |||
| Vertical acceleration az (m/s²) | |||
| Horizontal displacement ξ (m) | |||
| Vertical displacement ζ (m) | |||
| Total gauge pressure p (Pa) |
The table uses the CEM's conservative shallow-water boundary d/L = 1/25. The introductory lab uses the also-common 1/20 convention. These are accuracy guides, not abrupt physical transitions. Deep water requires d/L greater than about 1/2; the opposite inequality would be incorrect.
How to read velocities, accelerations and displacements
u and w are horizontal and upward velocities at a fixed mean position. To first order, differentiating the displacement in time gives velocity, and differentiating velocity gives acceleration: ∂ψ/∂t = −ω fixes the signs. The displacement describes the oscillatory orbit about a mean position; this first-order theory does not include net drift.
In shallow water, horizontal velocity is nearly uniform with depth, while vertical velocity vanishes at the bed. In deep water the orbital amplitudes decrease approximately as ekz. An infinitely deep approximation does not enforce a finite-bed boundary exactly.
Pressure and validity
Total gauge pressure is measured relative to atmospheric pressure. Separate it into hydrostatic pressure −ρgz and wave-induced pressure p′. The pressure transfer factor Kp = cosh[k(z+d)]/cosh(kd) attenuates the oscillating pressure below the surface. At z = 0, linear theory gives p′ = ρgη; it applies the boundary condition at the still-water level rather than evaluating the exact moving surface.
The approximations assume small amplitude, inviscid and irrotational flow, a level impermeable bed and no background current. Small d/L alone does not guarantee linear behaviour: large H/d and strong shallow-water nonlinearity require a more appropriate wave theory.