LEARN / OCEAN WAVES / CHAPTER 13

Random Seas and Responses

Full original scientific lesson and experiments, reorganized into a dedicated chapter.

Original physics and annotationsInteractive scientific demonstrationsScientific teaching examples

Scientific scope: This lesson retains the original scientific explanations, diagrams, equations and interactive demonstrations. All numerical examples are educational and subject to their stated assumptions; they are not independently field-validated engineering design tools or operational forecasts.

CHAPTER 13 / REALIZATIONS, GROUPS & SUBSURFACE RESPONSE

The same spectrum
can make different records.

A spectrum specifies how variance is distributed, but it does not fix when the largest crest will occur. Build different phase realizations of one target spectrum, then follow the same components below the surface using linear pressure and velocity transfer functions.

A · Surface elevation and pressure-equivalent elevation

Solid navy: η(t), surface elevation (m)Dashed blue: p′(t)/(ρg), pressure-equivalent elevation (m)

Observation depth: 10.0 m below still water (total water depth 20 m). At 0 m depth, the two linear-theory curves coincide.

The plot shows the first 128 s of a 256 s periodic numerical realization. The pressure trace excludes hydrostatic pressure; it is not an independently measured wave record.

B · Horizontal orbital velocity

C · Runs of larger waves

The threshold is this realization's H1/3. Adjacent coral bars form a run. A run is a sequence statistic, not a separate wave component or a prediction of group speed.

From variance bins to amplitudes

A frequency bin containing variance SᵢΔf receives a sinusoidal amplitude aᵢ = √(2SᵢΔf). Choose a phase φᵢ uniformly over 0–2π and sum aᵢ cos(2πfᵢt+φᵢ). A component's crest-to-trough height is 2aᵢ; using that height as the cosine coefficient would double the elevation and quadruple the variance.

Fixed amplitudes versus Gaussian coefficients

η(t) = Σ√(2SᵢΔf) cos(2πfᵢt+φᵢ)

Alternative: η(t) = Σ[Aᵢ cos(2πfᵢt) + Bᵢ sin(2πfᵢt)]

Aᵢ, Bᵢ independent, each N(0, SᵢΔf)

The experiment uses fixed amplitudes and pseudo-random phases. With many components its elevation distribution can approach Gaussian, but exact Gaussianity is not guaranteed. Independent Gaussian coefficients give a Gaussian process even for a finite sum, although individual realizations have random component amplitudes and variances. In both constructions the expected variance is ΣSᵢΔf.

Uniformly spaced frequencies make a simulated record periodic with repetition interval 1/Δf. For this 256 s record and integer Fourier bins, the sampled mean-square elevation equals the target m₀ = 0.25 m² to numerical precision. That deliberately convenient orthogonality does not apply to every finite observation.

Grouping depends on order.

A height histogram ignores which waves occur next to one another. Runs above a threshold, lagged height correlation, and a smoothed squared-elevation history offer complementary descriptions of grouping. A narrow frequency band often produces a slowly changing envelope, but a spectrum alone does not prescribe the exact sequence of large waves in a particular realization.

A transparent grouping measure

The plot counts consecutive heights above the sample H1/3 and reports the longest such run. This is a threshold-dependent descriptor. It is not the standardized SIWEH groupiness factor, and its short-record variability should not be interpreted as a fitted ocean statistic. A correlation of consecutive heights tests a different aspect of grouping and must state its estimator and sample size.

Different frequencies penetrate differently.

At depth z ≤ 0, linear theory attenuates pressure with Kp = cosh[k(z+d)]/cosh(kd). Each frequency has its own k, so the pressure record is not generally a single scaled copy of the surface record. Horizontal orbital velocity uses Ku = ω cosh[k(z+d)]/sinh(kd), with units s⁻¹.

Transfer functions and response spectra

p′(t)/(ρg) = ΣKpᵢ aᵢ cos(2πfᵢt+φᵢ)

u(t) = ΣKuᵢ aᵢ cos(2πfᵢt+φᵢ)

Sp′(f) = (ρg Kp)² Sη(f)

Su(f) = Ku² Sη(f)

These are co-located, unidirectional, linear responses. Pressure density has units Pa²/Hz; velocity density has units (m/s)²/Hz. In a directional sea, an x-velocity component also needs a directional projection. Multiplying one representative wave height by a single factor cannot recover all frequency-dependent response statistics.

At z = 0, pressure-equivalent elevation matches η in the linearized boundary condition. Moving deeper preferentially removes shorter-period pressure fluctuations. Recovering surface variance from a deeply submerged pressure sensor can amplify noise where Kp is small.

Neither the target spectrum nor this superposition predicts breaking, phase-coupled nonlinear waves, loads on a specific structure, or wave-driven currents. A realization illustrates variability; it is not a forecast of future crest timing.

Follow the wave below the surface: orbital velocity and the near-bed layer

Linear theory predicts the outer-flow horizontal and vertical orbital-velocity amplitudes at height zb above the bed, with 0 ≤ zb ≤ h:

Û(zb) = (H/2)ω cosh(kzb)/sinh(kh);   Ŵ(zb) = (H/2)ω sinh(kzb)/sinh(kh)

ω² = gk tanh(kh),   ω = 2π/T;   Ub = Û(0) = (H/2)ω/sinh(kh)

Here H is regular-wave height (m), T period (s), h depth (m), k wavenumber (m−1) and amplitudes Û, Ŵ and Ub are in m s−1. The irrotational extrapolation Ub is the free-stream amplitude just outside the thin bed boundary layer, not the actual velocity exactly at a no-slip bed. Vertical orbital velocity vanishes at the bed in this ideal linear model.

Blue: horizontal orbital amplitude Û; coral: vertical orbital amplitude Ŵ. Plot is linear, unidirectional, non-breaking wave kinematics; it is not a velocity time history.

Inset resolves the very thin ideal smooth-bed laminar oscillatory layer on a separate millimetre-scale axis. It is not drawn to scale against the water-column profile above.

Bed outer-flow amplitude Ub—
Orbital excursion amplitude Ub/ω—
Ideal laminar layer scale δν—

For an ideal smooth, no-slip bed with laminar oscillatory motion, δν = √(2ν/ω) is a viscous penetration scale (m), where ν is molecular kinematic viscosity (m² s−1). The ideal harmonic boundary-layer amplitude ratio is |1 − e−(1+i)y/δν| for vertical distance y ≥ 0 above the bed. Its near-bed velocity reaches zero at the wall. We use ν = 1.1 × 10−6 m² s−1 as an illustrative constant; real turbulent and rough-bed wave layers are not described by this curve.

Engineering limitation: Linear potential flow does not predict actual bed shear stress. The ideal laminar model is for understanding scale separation—not for estimating environmental drag, wave-driven currents or design loads. Turbulence, roughness, directionality and combined forcing require an independently validated boundary-layer formulation. No transport or seabed-evolution prediction is made.

Scientific sources: Bosboom & Stive, Coastal Dynamics (2023), §§5.4.1 and 5.4.3 (orbital velocity, boundary layer); Holthuijsen (2007), §5.4. These are new original computational figures and an idealized Stokes-layer demonstration.