LEARN / OCEAN WAVES / CHAPTER 11

Spectral Shapes and Models

Full original scientific lesson and experiments, reorganized into a dedicated chapter.

Original physics and annotationsInteractive scientific demonstrationsScientific teaching examples

Scientific scope: This lesson retains the original scientific explanations, diagrams, equations and interactive demonstrations. All numerical examples are educational and subject to their stated assumptions; they are not independently field-validated engineering design tools or operational forecasts.

CHAPTER 11 / SPECTRAL SHAPES & MODELS

Equal wave height.
Different spectral shapes.

A spectrum contains more information than its total variance. Two sea states can share Hm0 while distributing that variance across very different frequencies. Parametric spectra describe useful families of shapes; they do not replace measurements or a wave model.

The area is held at m₀ = 0.36 m², so Hm0 = 2.40 m. The reference frequency fp = 0.125 Hz belongs to the underlying deep-water shape. Finite-depth weighting can move the sampled maximum. The computation uses 0.020–0.800 Hz; the chart shows 0.02–0.50 Hz.

What the families represent

The original Pierson–Moskowitz spectrum describes a fully developed deep-water wind sea under restrictive wind conditions. A two-parameter PM-shaped or Bretschneider form specifies height and peak period independently. JONSWAP adds a peak-enhancement factor to represent more sharply peaked developing seas. γ = 1 removes that enhancement.

TMA multiplies a JONSWAP form by a finite-depth equilibrium factor. It describes a family of finite-depth spectra; applying it is not equivalent to transporting an offshore spectrum shoreward with conserved energy flux. Chapter 14 examines that separate transformation problem.

A mixed swell and wind sea often needs multiple partitions. Ochi–Hubble is one two-component parametric family, but it is not the only way to represent two peaks. More than one directional system can also share a single frequency peak, so the number of peaks does not uniquely count wave systems.

Shape equations and the normalization used here

B(f) = f−5 exp[−(5/4)(fp/f)4]

J(f) = B(f) γr(f),   r(f) = exp[−(f/fp−1)²/(2σ²)]

σ = 0.07 for f ≤ fp; σ = 0.09 for f > fp

Sᵢ = (Hm0/4)² qᵢ / Σ(qⱼ Δf)

Choose q = B, J or JΦ. This explicit finite-grid normalization preserves the selected variance. It does not estimate the original Phillips coefficient α from wind or fetch. All densities are per hertz.

Bandwidth is a definition, not just a visual impression.

The coefficient ν = √(m₀m₂/m₁² − 1) is the coefficient of variation of frequency when variance is used as the weight. It is zero for a single spectral line and increases as frequency content spreads. It is non-negative but is not universally bounded by one. Distinct bandwidth measures need not rank spectra identically.

Higher moments, peakedness and frequency conventions

ε = √[1 − m₂²/(m₀m₄)]

Qp = (2/m₀²) ∫₀∞ f S(f)² df

ω = 2πf;   Sω(ω) = Sf(ω/2π)/(2π);   mn,ω = (2π)nmn,f

ε lies between zero and one when the required finite moments exist. An ideal f−5 tail has a divergent fourth moment if extended indefinitely, so m₄ and ε from a finite grid depend strongly on the upper cutoff. Qp measures concentration differently; it involves the square of the density, not merely m₁. The readouts above deliberately report ν and the integration limits instead of presenting a cutoff-sensitive ε as a universal sea-state property.

With moments in Hz, Tm01 = m₀/m₁ and Tm02 = √(m₀/m₂). With angular-frequency moments, both expressions require a factor 2π. A formula cannot be transferred between conventions without changing its density and moments.

The finite-depth equilibrium factor

Φ(f,d) = tanh²(kd) / [1 + 2kd/sinh(2kd)]

(2πf)² = gk tanh(kd)

This factor follows from the finite/deep ratio of k−3dk/dω. It tends to one in deep water and to ω²d/(2g) as kd tends to zero. The numerical solution uses the exact linear dispersion relation. The chosen normalization subsequently rescales JΦ; it does not conserve offshore energy flux or simulate breaking.